FB4 – Integrated Network Hardware, for your laser shows

A revolution is taking place in the laser entertainment industry, as more and more clients begin to shift to complete network setups, using Pangolin’s proprietary FB4 Network-based Laser Control Hardware, which acts as a media server for laser and multimedia shows.

For many years, the laser industry has used the common “ILDA” cable, as the standard connection for setting up and controlling laser shows. In reality, an “ILDA cable” is nothing more than a DB-25 male to female cable, featuring a 25-pin connection (commonly used in the printing industry). While this means for sending a signal from control software and hardware to a laser has sufficed, it has also presented substantial limiting factors for many clients, making it harder and harder to do larger scale, more sophisticated laser displays.

Some of the challenges when working with ILDA cables include:

  • Short cable runs – When using ILDA cable, you are generally limited to a  maximum run of around 150ft (50M). When extending the cables further, you may notice a loss in the signal or quality of output. And for large scale productions, stadium shows, and festival shows, this has proven to be a severe limiting factor.
  • ILDA cables are a nightmare to run, especially through trussing. The bulky “heads” on ILDA cables easily get tangled, and make it quite challenging to work with.
  • ILDA cables are very sensitive, and the pins on them can easily bend and break. When this occurs, you have a loss in signal running to the laser, that can lead to distortion in the laser effects and shows that are being displayed, or, in even worse case situations, it can impede the safety of the laser projector as a whole.
  • When using ILDA cables, you can only drive some many lasers from a single control position. Making it it hard to drive large scale shows, where multiple projectors are used.

A better approach – The Advantages of using Lasers with FB4

FB4 is a new network control hardware from Pangolin, that acts as a media server for laser and multimedia shows. FB4 can be integrated directly inside of a laser projector, so that you no longer have to use the outdated ILDA cable. Instead, all of your laser shows and displays, can be controlled entirely in a network setup.

When working with FB4, you have a variety of control solutions to choose from, allowing you as the artist to decide what control configuration is best for your needs. Common control configurations include:

Streaming Mode – Where you simply run a network cable from your PC running Pangolin software (QuickShow or BEYOND) to the projector, and you are setup and done.

Lighting Console Mode – Just program the desired laser effects and shows you want in Pangolin software, and save this to FB4’s memory. Then, run DMX or ArtNet from your console to the back of the laser, and you are setup and done. No PC is required, when actually running the shows (unless you want to use one).

Auto-Mode – With our auto-mode feature, you can design any laser effects or shows you want in Pangolin software, and save them to the proprietary memory on FB4. FB4 has a built in clock, which you can then set to a specified date and time, and this will then run your content back automatically, without the need for a PC in the show setup, or at the control station. And, if you need to change or update content,  you can do this over a network cable, without having to physically “go to” the laser.

FB4 is currently available in four different versions, including FB4 Standard, FB4 ILDA, FB4 DMX and FB4 MAX. A detailed page discussing FB4, and the various configurations and control setups that are possible, can be found by Clicking Here.

We also have a full line of lasers available, featuring integrated FB4 hardware standard. And these are available at great rates, through the Pangolin Projector Referral Network. Find out more, see pricing, and place an order, by Clicking Here.

Marriott World Center

A recent high-profile multimedia installation at the iconic Marriott World Center in Orlando, FL, called ‘Light up the Night’ further illustrates how lasers are taking multimedia shows to the next level. This installation broke new ground, as the whole production was sold to the Marriott as a revenue-generating model, which is a bit different from the general notion of selling special FX and multimedia installations, as “entertainment packages”. Mitchell Piper, owner at K-Systems AV, and award winning Creative Designer Gabe Letourneau led the project, showing the Marriott how such an installation could be used to further increase revenues at the property.

Before the project was sold, K-Systems actually setup a demonstration for the Marriott so that they could calculate the real return on investment that would be garnered by proceeding with the concept. And what the Marriott found was that by installing this sort of multimedia setup, they were able to increase client bookings, food and beverage sales, as well as the sale of corporate event packages, by huge margins.

The installation was done at the Marriott World Center’s beautiful resort pool area, which overlooks the hotel property. Lasers serve as the main element in this multimedia setup, and are used to project beautiful beam affects over the pool, bar and lounge area. The lasers are also used to project logos for corporate clients the Marriott hosts, which come for various tradeshows and events taking place at the property.

What made this installation so interesting from a design and technology standpoint, was the use of new laser control and laser projector technology, from industry experts Pangolin Laser Systems, Inc. and KVANT s.r.o.

Since 1986, Pangolin has been the world’s leading provider of laser entertainment technology. The company has received 28 international patents, and products made by Pangolin Systems have also contributed to more than 400 artistic awards for their clients. And for over 20 years, KVANT has been a highly respected manufacturer of laser projectors for entertainment applications. And they readily integrate Pangolin technology into their systems, ensuring that they remain on the cutting-edge of the laser projector market.

In 2015, Pangolin started a new division of the company called the Pangolin Projector Referral Network, which was founded to provide clients with professional quality laser projectors that are the best choice for a given application. Considering that Pangolin developed and pioneered the laser show control and safety technology used for the large majority of laser performances worldwide, they felt there were in a good position to begin assisting clients with the purchase of laser projection systems as well.

Pangolin’s Chief Operating Officer Justin Perry, comments on the start of this new division… “Pangolin is one of the most trusted brands in the laser entertainment industry. And for many years, clients have contacted us asking for information and advise on which laser systems they should use for different shows and applications they have taking place. Considering that we developed much of the laser control technology powering the industry, and that we understand the differences between various laser projectors on the market today – as well as how these lasers fit into the diverse types of shows and projects taking place, we felt we were in a great position to serve the industry as a whole – helping clients obtain professional laser projectors, that are right for their desired application. And with our great relationships in the market, we are able to provide our clients with aggressive price points on these laser projectors, as well as back them up with the first class support and service customers have come to love from Pangolin. Our new division ensures that clients have a seamless experience when integrating lasers into a project or show.”

So for the Marriott World Center multimedia project, K-Systems turned to Pangolin for assistance with all laser related aspects of the show – including the installation of five high power KVANT laser projectors, driven with Pangolin’s new FB4 hardware, and all controlled using Pangolin’s BEYOND software.

From a technical perspective, this installation was quite innovative in nature, as several new laser and multimedia technologies were combined together, to leave the Marriott with a self-running and self-sufficient installation, which in many ways is entirely “maintenance free”.

One of the exciting technologies being utilized at the Marriott installation is Pangolin’s new laser control hardware platform, called FB4. This state-of-the-art laser control hardware is entirely network based, and gets built directly inside of a laser projector, acting as a sort of “media server” for laser shows.

FB4 hardware supports all major show protocols, including DMX, ArtNet, Network, OSC, SMPTE, and ILDA… And will also have support for CITP in the near future. FB4 allows lighting professionals to control lasers in complete harmony with other multimedia show elements, seamlessly integrating lasers into any show, installation, production, or event.

Most lasers on the market today utilize the older “ILDA” protocol for control. Where an “ILDA cable” (which is really a DB-25 male to female connection) is run from a control station to a laser projector. While the ILDA protocol has served the laser show industry well for many years, with the growth in popularity of multimedia show productions, the need for more advanced laser control has grown.

Pangolin’s new FB4 hardware is revolutionizing the industry in that regard, providing full network control of laser shows, without the need to use the outdated ILDA cable. And now designers can control lasers entirely from a lighting console (via ArtNet or DMX), from a PC (via a CAT5 cable), or in auto-mode, using FB4’s proprietary memory system. And all effects for the laser can easily be programmed in Pangolin software, and then saved to the FB4 hardware, inside the laser. Making it very simple to create complex laser shows, which can be controlled in a variety of different ways. FB4 hardware has also been used on a variety of tours and events, including the recent Metallica World Tour, TomorrowLand festival in Belgium, as well as the recent Pretty Lights performance at the Serpent Festival in Australia.

KVANT’s new line professional laser projectors also integrate Pangolin’s FB4 hardware, providing complete network control for any of their systems. And KVANT is leading the industry in that respect, being the first laser projector manufacturer to have systems with integrated FB4 control hardware available.

This is why KVANT lasers were chosen for the project, as K-Systems and their constituents at the Marriott demanded technology that would be self sufficient, and easily interface with other multimedia show elements.

In addition to lasers, high resolution video screens, G-Spot moving head lights from well known manufacturer SGM, and a series of haze machines from MDG surround the resort area, providing a nice backdrop to the powerful lasers, which entertain guests and clients from around the world.

Pangolin’s BEYOND software is being used to control nearly all aspects of the show, including the lasers, video and even some of the DMX lighting.

The BEYOND software is very powerful, and has a lot of options for compatibility with other media, including Timecode. Because of this, the team at K-Systems (led by Creative Designer Gabe Letourneau) were able to do things like take in LTC and OSC commands, and send things like midi triggers to other consoles (including the GrandMA) and equipment that could be added in the future.

In a recent interview, Letourneau notes… “In order to control as many elements as possible from one single point of access, we had BEYOND control the lasers, video, and audio, all on a single timeline.

This is really helpful if you need to make a quick change, or add or remove any elements. This also allows us to easily change and edit content on the fly, when the show needs to be customized. Given that the Marriott requested the ability to customize content quickly for various clients, events, or promotions they have taking place, we felt that BEYOND’s versatility made it an excellent control platform in that regard. Having everything in BEYOND also allows us to avoid any timecode delays or complications, and keeps everything on the exact same clock. Because all of the content on BEYOND’s timeline is within a few frames, nothing will ever be off. And we can organize different parts of the show’s timing very easily, just buy selecting all of the content in one area, and sliding it into place…

… All of this flows nicely as we have BEYOND controlling the GrandMA as well. The Pharos software oversees the day elements of the show (such as property lighting) and then triggers the LTC to start BEYOND, which is controlling the GrandMA. We also send audio to a Rane HAL, and a Control 4 video system. The setup works really well, and makes it very easy to make changes or customize content when required. And because of this, the installation can essentially run itself. “

The whole Marriott Light up the Night project further illustrates how lasers are being used as the centerpiece at a wide variety of events, installations and shows. As well as how new laser technology from companies like Pangolin and KVANT, are helping lasers more easily interface with other multimedia show elements, making it easier for designers to create, control and run synchronized large scale events.

Due to the success of the installation and it’s ability to generate revenue for the establishment, Marriott is already is already exploring the idea of installing this same concept at a variety of other hotel and property locations. And because of the high profile nature of the project, K-Systems has also received a variety of inquiries from other hotel and event establishments. The owner of K-Systems Mitchell Piper goes on to note… “We are extremely proud of the Marriott installation, and it’s notability for being one of the more technically sophisticated multimedia installations taking place at a hotel property. The install serves as a great model for future projects of this kind, and we at K-Systems are extremely excited to bring the concept to more establishments around the world.”

20160205_204928 20160205_210424_02520160205_205816 IMG_241_newIMG_2337IMG_1578 copy 2_new

Show Tech 

5 x KVANT Spectrum 20W OPSL/DIODE Lasers with Integrated FB4 Network Hardware

1 x BEYOND Essentials Software License

1 x GrandMA Control Wing

What is the Pangolin Projector Referral Network?

The laser show industry is growing at a rapid pace, with more people performing laser shows than ever before. As such, the demand for laser projectors, laser show systems, and laser control products has also grown. This trend has led to more companies producing and advertising laser projectors and laser show gear, than ever before.

Laser is a unique technology, and different in many ways to traditional light sources, such as LED. And buying a laser projector can sometimes be confusing process, with so many suppliers and vendors out there offering product.

In addition, the lack of “standardized specifications” of laser projectors (such as output powers, scan speeds, modulation, beam diameters, etc.), can make it very confusing at times, to find the best laser for your specific needs.

To help address this growing issue in the marketplace, Pangolin has started a service called the Pangolin Projector Referral Network, whereby we help you as a client find a quality laser projector, at an affordable price, and we ensure you receive first-class support and service on your equipment all along the way.

Pangolin pioneered much of the technology used to power the laser industry. Everything from laser control systems (including laser show software and hardware), to safety products, to optical scanning systems and laser diode protection. And from our work in the field, we’re proud to say that our developments have received 28 international patents, and contributed to over 400 international awards for our clients. In addition to our vast experience with laser technology, we have also visited nearly every single factory (in the US, EU and Asia) making laser systems. As such, we have great insight into who is making quality laser projectors, and how those units will perform in the field. And from this experience, we help you as a client find the best laser projector for your specific needs.

We take the guess work out of buying a laser! And when purchasing through the Pangolin Projector Network, we help you understand the differences between all of the laser systems on the market today, as well as how to interpret their specifications. And we educate you, so that you understand how those specifications relate to the type of shows you wish to perform. We then work to find you the best laser projector for your needs, and at a great price, backed up with the outstanding service and support the industry has come to love from Pangolin.

We've received a lot of questions from clients, asking for more informaiton about ZONES inside of Pangolin software, and how to use zones to create better laser shows.

A zone is (essentialy) a tool inside of all Pangolin software, that allows you to output laser content to different projection areas, from a single or multiple laser projectors.

For example, if you have one laser, and you wanted to project an atomospheric effect over people's heads, and at the same time project a graphic/logo in another area, you could use our zones tool to help configure this. Zones go much deeper, but this provides a basic idea of what a zone is, and how it might be used in a real world scenario. 

Another example of using a zone, is if you wanted multiple types of atomostpheric laser effects to be projected (perhaps a wave in one area, and hot beams in another area), you can use the zones settings to configure this in Pangolin laser software. 

We've created the following Pangolin Tutorial video, to help address the commonly asked questions "what is a zone", "how do I use zones to create better laser shows", "how do I setup a zone", etc. 

We hope you find this informational. More tutorials are coming, and if you have a request for future tutorials, share it with us!

We’re Excited to Introduce the All-New Pangolin Laser Media Dock (5.5)

During a professional show, we realize that cables for your FB3QS hardware, Enttec, TC2000 and other devices can tend to get out of control. That is why we've partnered with our good friend Holger Walter (a longtime, and well-respected laser show designer) to create the Pangolin Laser Media Dock (5.5). 

This is a great way to house up to 5 x FB3QS devices, an Enttec and TC2000 for professional show control. It also featuers MIDI ports, so that you can connect an APC40 or other MIDI device, for external control. All inside of a wonderful 19-inch rack mount. It also features high-quallity USB ports and Neutrik connectors. We're taking orders now, but a limited quantity are in supply. Email us (contact@pangolin.com) for details.

 

The 2014 Pangolin Tour Makes Headlines

 

TOUR

The Pangolin Team is currently traveling across Europe, meeting with distribution partners across the area to conduct in-depth training seminars on their new BEYOND software, as well as on their award-winning QuickShow and LD2000 software programs. This year's tour takes the Pangolin team to Rome, Milan, Madrid and Moscow, which are all very large emerging markets for laser displays. The event has been gaining a lot of media attention following the recent Prolight+Sound exhibition in Frankfurt, Germany and as a result, TPI Magazine has even featured the tour in the latest edition of their online newsletter. Additional information about the tour, and the full TPI article can be found online by clicking here.

The Pangolin Team has additional tour dates being planned for the United States, Asia and possibly Brazil. For more information on Pangolin, and their award-winning lineup of laser control software, and laser show hardware visit www.pangolin.com.

LaserX honors the memory of Nelson Mandela, with beautiful laser display

Nelson Mandela

 

In recognition of the recent passing of former President Nelson Mandela, LaserX (for their client The Western Cape Government), paid tribute to the great man by choreographing a laser light show to display Nelson Mandela’s face, name, and messages onto the side of beautiful Table Mountain in Cape Town, South Africa. 

 

To perform such a stunning laser display, the team at LaserX used Pangolin’s new BEYOND laser control software and FB3QS hardware. The new features inside of Pangolin’s BEYOND software (including the advanced drawing program and geometric correction features), allowed for LaserX to create these custom animations, and display them onto the side of Table Mountain in Cape Town. 

 

Check out the full press release discusing this notable event, by clicking here

Pangolin Releases 2013 Holiday Special Offers

xmas2013

We've just released our 2013 Holiday Special Offers, with HUGE discounts on your favorite Pangolin products. These offers are valid now through January 15, 2014. Don't miss your chance to get that new Pangolin System you have been waiting for. Stock is limited, so act now!

A complete listing of all our holiday special offers can be found online here: http://newsletter.pangolin.com/t/ViewEmail/r/CFEA66C2E7728A7A2540EF23F30FEDED 

LaserNet and Pangolin Take the Show at LDI 2013

LDI 2013

At the 2013 LDI show in Las Vegas, Nevada; Pangolin Laser Systems and Laser Production Network (LaserNet) put together a laser show display, that was second to none, With a total of 18 ILDA compatible laser projectors being controlled, and with "live" laser show performances from DJ Mobius8 (sponsored by LaserNet), the join booth was teeming with energy, as pepole flocked to see the show, and amazing display of laser light. 

Check out the official press release online, by clicking here

And watch the official video from the event here: https://www.youtube.com/watch?v=zK-yjwR8K18

 

We've just returned from the 2013 Expo Music show in Sao Paulo, Brazil, and what an amazing event this turned out to be. We were proud to partner with your distributor Electra Light, to bring the beauty of lasers to this region of the world. 

With the World Cup and Olympic Games coming to Brazil, more and more requests for laser light shows are coming from this region. As a result, Pangolin has partnered with many of the world's leading laser projector manufacturers, to bring high quality laser light show products to the region. 

In addtion, we have placed a large stock of Pangolin products in Brazil, making it easier than ever for our clients in this region, to obtain the Pangolin System of their choice. We've also amped up our support for our Brazilian clients, offering our software in Portuguese, as well as having on-staff Portuguese speaking support technicians. 

We look forward to seeing the great laser shows taking place in Brazil in the months to come. 

 

20130919_111714